Robert Technology
Phone: 732-254-6389 | Fax: 732-254-1493 | Email: info@roberttechinc.com
ROBERT TECHNOLOGIES INC.
"Reconnecting The World"; With Integrity, Quality and Pride
Home About Us Services Distributors Presentations Approvals Contact Us
When & How
Connector manufacturing company - Robert Technologies, Inc. began in 1989. Since then, "RTI" has become well-respected, gaining a reputation for supplying the industry with high reliability electronic connectors that are reasonably priced and readily available. In September 1999, Robert Tech received our first QPL (Qualified Product Listing) on the SAE-AS-81703 Series 1 connector line. This approval has helped us open doors to many companies involved in the aerospace, medical, oil exploration, energy, and communication industries.

In 2001 we were asked to make connectors for power distribution systems and we put our connector know-how to use and started producing a COTS version of the Class L connector. It was decided after years of defect free manufacturing Class L connectors that we would produce them in MS as well. In June of 2010 we received our QPL approvals and listing.
Primary Focus
RTI's primary focus is to provide the military and commercial industries a choice on where they can purchase their military and commercial electronics connectors. RTI focuses strongly on custom design, custom manufacturing, and retrofitting. By giving that choice, we feel our quality, service, professionalism, and competitive pricing will give us the edge in the areas we focus on. Procurement, R&D, and Production departments should not be limited on what and where they can buy from. Situations like these can cause serious dilemmas in planning, meeting deadlines, and departmental budgets.
Primary Product Line
RTI's primary product line consists of the QPL'd MIL-DTL-22992 Class L compatible connectors, QPL'd SAE-AS-81703 Series I connector line which is QPL Approved, RT Solder Series (Commercial), and RTS Crimp Series (Commercial). These connectors are a Quick-Release style, and are used primary in high-end applications. Listed below are the various applications where you can find RTI products.
Military / Government Applications
Power Generation
Power Distribution
Missile Guidance Systems
Missile Drones
Radar Jamming Systems
Cockpit lighting and instrumentation
Exterior Aircraft Lighting (Landing Gear, Marker Beacons)
Government Subcontractors (Cable Assembly Houses, Refurbishing Houses)
Commercial Aircraft
Black Boxes
Interior Lighting
Accelerometer / Altimeter Gauges
Marker Beacons
Landing Gear
Industrial
Oil Exploration Machinery
Nuclear Reactors
Range of Product
The RTI Class L connector line is a power connector with current ratings ranging from 40 through 200 amperes. This type of connector is required for all ground power equipment by MIL-STD-454, and are considered the preferred connector under MIL-STD-1453, which mandates its use in all equipment procured by the military. The selection of Class L connectors was primarily based on maximum user safety and equipment protection.

The Military 81703 Series I Connector line has various insert configurations to suit almost any application. Contact gauges range from 8 to 20 which are non-removable solder termination, and can also be fitted with coaxial contacts.

The RT Solder Series (Commercial) is equal in performance, uses identical insert configurations, contact gauges, and contact style as the SAE-AS-81703 Series I line, but is more versatile. This allows for modifications to be applied to the connectors for specific requirements.

The RTS Crimp Series (Commercial) exceeds the SAE-AS-81703 Series I and RT Solder Series Line in performance. This line will intermate with the corresponding layouts in the SAE-AS-81703 Series I line and the RT Solder Series line. This line is used in more critical applications where the environment and voltage rating are a factor. This line also has more diverse insert configurations including a 61 pin insert layout. Contact gauges range from 8 to 20, are removable crimp, and can also be fitted with thermocouple and coaxial contacts. This line also has the capabilities to be specifically customized through various modification codes provided by the factory.
Facility
RTI has a state of the art machine shop and a tooling facility for custom design and modifications. Robert Technologies controls our manufacturing through our ownership of all tooling for the parts whether we manufacture in house, or through our network of qualified subcontracting partners to assure you of consistent quality products. We also have in house engineering services and our facility is qualified to Mil-STD-790 quality standards.
Quality Control
Robert Technologies, Inc. fully complies with government/industry testing requirements, and is Mil-I-45208A compliant. We are approved to Mil-STD-790 as well as Mil-I-45208 and we are in compliance with all ISO standards.

For any additional information on Robert Technologies, Inc. products, or distributor locations, please call, write, or email us.

Robert Technologies, Inc.
3 Fairfield Court
Manalapan, NJ 07726
Tel: 732-254-6389
Fax: 732-254-1493


Home About Us Services Distributors Presentations Approvals Contact Us
© 2012 Robert Technologies, Inc. All rights reserved.