Robert Technology
Phone: 732-254-6389 | Fax: 732-254-1493 | Email:
"Reconnecting The World"; With Integrity, Quality and Pride
Home About Us Services Distributors Presentations Approvals Contact Us
Flange Mount Connector RT90555 (Wall Mount Connector Receptacle)
RT90555 power connector with flange mount (wall mount) connector receptacle cross reference MIL-Spec connectors MIL-DTL-22992 ( MIL-C-22992 ) CLASS L MS90555 . RT90555 is supplied with socket contacts and designed to meet the demands of heavy power interconnections. For shell finish, shell size, shell/keyway position, insert arrangement and contact type, see RT90555 identification. Other Robert Technologies heavy duty cylindrical connectors RT90556, RT90557, RT90558.

RT90555 flange mount connector receptacel and flange mount connector plug RT90558 are large size cylindrical connectors (cylinder connectors), highly suitable for industrial or military applications.
The RTI MIL-DTL-22992 (MIL-C-22992) Class “L” connector line is a power connector with current ratings ranging from 40 through 200 amperes. This type of connector is required for all ground power equipment by MIL-STD-454, and are considered the preferred connector under MIL-STD-1453, which mandates its use in all equipment procured by the military. The selection of Class “L” connectors was primarily based on maximum user safety and equipment protection.

Ordering Information

Connectors are supplied with removable contacts. Contacts are supplied unassembled. Also supplied are applicable accessories. Additional contacts may be ordered separately by part number. Connectors may be ordered by RTI part number or we can cross reference the military (MS) part number - MS90555. Please contact us for modification codes. Or

Please leave your name, phone number and email. We will get back to you promptly to answer any questions or quote a price on the part.


RT90555 Installation Instruction (PDF)         MIL-C-22992 Class L Parts Number: MS90555 , MS90556 , MS90557 , MS90558

  • RTI Class “L” connectors are equipped with arc quenching chambers to minimize damage to cable or connector and reduce the hazard of live circuit rupture to personnel during the most severe field conditions.
  • Designed with a coupling sequence that engages both the neutral and ground contacts before the power contacts.
  • Socket contacts are recessed well within the dielectric face, which represents a “dead face” to the outside world.
Equipment Protection
  • Connectors are shell polarized (key/keyway) for alternate voltage and phase requirements.
  • Discrimination of 60 Hz & 400 Hz accomplished by alternate nsert positions.
  • Current rating controlled by shell size.
  • Connectors are fully grounded for all AC applications.
Additional Design Features
  • Shells are machined from high strength aluminum and are supplied with conductive or non-conductive finishes.
  • Equipped with necessary seals for waterproofing whether mated, unmatted, capped or uncapped.
  • Crimped or soldered contacts, hand insertable and removable.
  • Quick connect/disconnect for mating and unmating during severe field conditions.
Part Identification:
RT90555 C 44 4 12 S Z
1 2 3 4 5 6 7
1. Connector Designation
RT 90555 Wall Mount Receptacle (Power Source)
2. Shell Finish (ZINC OD)
C: Conductive for Grounded Assemblies.
N: Non-Conductive Assemblies. Figure 1.
3. Shell Size (28, 32, 44, 52) Related to current carrying capacity
32 – 60 amperes
44 – 100 amperes
52 – 200 amperes
4. Shell/Keyway Position
1, 4, 5, and 6 positions are available to prevent cross mating of dissimilar voltages. Figure 2.
5. Insert Arrangement
6. Contact Type
P: Pin
S: Socket
7. Alternate Insert Positioning
Discrimination of 60Hz and 400Hz assemblies is accomplished by alternate positioning of inserts.
Figure 2.
Keyway Position
N designates normal position. Four other positions (1, 4, 5, and 6) of the master key/keyway prevent mating of incompatible voltages. Refer to the illustration above for applicability.
Home About Us Services Distributors Presentations Approvals Contact Us
© 2012 Robert Technologies, Inc. All rights reserved.